• Network analysers

Specifications Power supply
Rated voltage: 115 VAC or 230 VAC +15% -20% on request
65÷250 VAC / 90÷250 VDC on request
19÷60 VDC on request
Consumption: 2 VA max

Voltage inputs
Maximum measurable voltage: 600 (750) VAC max L-L
Input impedance: ›1.3 MOhm
Burden: max 0.15 VA per phase
Frequency: 45 - 65 Hz

Current inputs
Rated current: 1 / 5 ARMS programmable
Maximum overload: 10ARMS continuous - 100 ARMS for 1 sec.
Input impedance: 0.02 Ohm approximately
Burden: max 0.5 VA per phase
Insulation voltage: 150 VAC max between phases
Rogowski input: 200÷49995 A on request


Typical accuracy
Voltage: ±0.2% reading from 10% to full scale
Current: ±0.4% reading from 0.25A to 6A
Energy: active: 0.5% according to IEC/EN 62053-22
reactive: class 2 according to IEC/EN 62053-23
In=5A Imax=6A Istart=2mA
Frequency: ±0.02% reading ±1 digit from 45 to 65 Hz

Display and operating controls
Display: back-lighted graphic LCD 132x64 dots
Keypad: 4 push-buttons

Communication port
Type: RS232 or RS485 on request, optoisolated
Baud rate: programmable from 300 to 57600 bps
78 kbps fixed, in case of LONBUS
up to 12 Mbps, in case of PROFIBUS
10/100 Mbps, in case of ETHERNET on LAN side

Real time clock
Type: with battery backup
Accuracy: ± 30 ppm

Digital outputs
Type: 2 optoisolated (50V-100ACA-CC)

Environmental conditions
Operating temperature: from -10°C to +60°C
Storage temperature: from -25°C to +75°C
Relative humidity: 80% max. without condensation

Mechanical characteristics
Material: plastic enclosure
Protection degree: IP54 (front panel); IP20 (terminals)
Terminals: conductors 2.5 mm2
Size / weight: 96x96x60 mm or 96x96x100 mm
500 gr max, depending on the configuration

Standards compliance
Safety: 73/23/EEC and 93/68/EEC directives, EN61010.1 safety standard
EMC: 89/366/EEC directive and following modifications 93/31/EEC and 93/68/EEC, EN50081-2, EN50082-2, IEC/EN 62053-22-23

Network analysers

  • Brand: Algodue
  • Product Code: UPM 307
  • 0.00€

  • Ex Tax: 0.00€