Pulse meters are intended for counting AC/DC voltage signals, generated by additional peripheral devices in order to determine the number of carried out working cycles in automatics systems, e.g. in order to control the number of press strokes, the number of revolutions of a rotating device, the number of components leaving the production line, etc.

* control panel, enabling programming and the monitoring of device operation
* T input, adapted for operation with AC/DC signal, 5 to 264V amplitude and 50 Hz frequency for AC and 5kHz for DC signals
* possibility to set THRESHOLD  parameter (1÷99 999 999 range), specifying the limiting number of pulses counted in a single operation cycle
* external RESET input
* relay output signaling the preset meter state (contact1C/O 8A)
* local counter, reset using the external reset input or using RESET button
* total counter for all impulses (loop mode 0 → 99 999 999 → 0 → ... or reset using the meter configuration menu)
* digital filter, enabling the limiting of maximum frequency of the counted pulses (in order to reduce interferences on meter input)
* local and total meter state memory after supply failure
* program menu in three languages: Polish, English or Russian

Technical data

supply 24÷264V AC/DC
T input voltage  low state 0÷5V AC/DC
T input voltage  high state 10÷264V AC/DC
maximum frequency for DC signal <5kHz
maximum frequency for AC signal <50Hz
RESET input voltage 24÷264V AC/DC
contact 1P
maximum relay load current 8A
power consumption 1,5W
working temperature -20÷50°C
connection screw terminals 2,5mm²
dimensions 3 modules (52,5mm)
fixing on rail TH-35

Programmable pulse meter

  • Product Code: CLI-01
  • 0.00€

  • Ex Tax: 0.00€